LED Normline

For the LED curing system

This series has been developed for drying UV inks with energy saving LED beamer systems. (LED = Light Emitting Diode)

The LED Normline series doesn’t need short-wave UV beams which will create ozone for the through hardening.

The advantage is that it will be not heat built up at the beamer device and the temperature in the paper stack will be similar as with conventional inks.

Through the low heat generation in printing process with LED systems the LED Normline is especially suitable for printing on substrates which are sensitive against temperature.

Additional advantages of this system are:

  • Low energy consumption
  • No generation of ozone
  • Fast through hardening
  • Excellent ink-water balance
  • Fast clean start of printing plates
  • Can be used with or without IPA
Item no.LightTransp.SpiritNitroAlkali
LED Normline Yellow2900LD015++++
LED Normline Magenta4391LD015+++-
LED Normline Cyan7019LD018++++
LED Normline Black9LD0018-+++

+ property given, - property not given


Important note of usage:

Due to the various kinds of printing substrates on the market, we highly recommend a preliminary test run to verify the adhesion properties.  


UV inks have a limited shelf life. In case of appropriate storage at 20 °C and protected from direct sunlight, we guarantee a shelf life of 6 months.



This technical instruction sheet is designed for your information and reference. It is based on and conforms toour current knowledge. However as actual application is affected by many factors over which we have no control,we are not liable for printing failures.