UV H-Line

For the novel H-UV system

This process series has been developed to cure printing inks with the novel H-UV system of Komori.

The series UV H-Line does not require short-wave UV radiation for through hardening.

It is of advantage that there is no heat development on the lamp. Thus the stack temperature is similar to that of conventional inks.

Due to the low heat development an irritation of material can be ruled out to a large extent.

Further advantages of this system are:

  • Low energy expenditure
  • No ozone formation
  • Fast through hardening
  • Good ink/water balance
  • Fast running clean of the plates
  • Can be processed with and without IPA
  • This series is suitable for all common dampening systems
Item no.LightTransp.SpiritNitroAlkali
UV H-Line Yellow2900UH015++++
UV H-Line Magenta4391UH015+++-
UV H-Line Cyan7019UH018++++
UV H-Line Black9UH0018-+++

+ property given, - property not given

 

Important note of usage:

Due to the various kinds of printing substrates on the market, we highly recommend a preliminary test run to verify the adhesion properties.  

Storage:

UV inks have a limited shelf life. In case of appropriate storage at 20 ┬░C and protected from direct sunlight, we guarantee a shelf life of 6 months.

 

 

 

This technical instruction sheet is designed for your information and reference. It is based on and conforms toour current knowledge. However as actual application is affected by many factors over which we have no control,we are not liable for printing failures.