Matt varnish Z378

For supplementary coating if matt effects should be achieved.


  • Gives a matt effect on printed matters
  • Increases abrasion resistance
  • Can be used on solid area (without water) or for a partial varnishing
  • Normal drying time; adding 2 % dryer 452 or 3 % Grafo Drier for a partial varnishing with water, the drying can be accelerated


Is suitable for the printing on all offset inks.

Pile height and powder application must be in relation to the coating film thickness and the printing substrate.

Printing additives:

  • Drier Z411
  • Thinner Z410
  • Printing gel Z408


This technical instruction sheet is designed for your information and reference. It is based on and conforms to our current knowledge. However as actual application is affected by many factors over which we have no control, we are not liable for printing failures.